Create an Account

VLT Road Combinations Roller Brake + Road Contact Tester


VLT Road Contact – Suspension / Roller Brake Testers as Stand-alone version. The most advanced solution to offer your Vehicle owners the service they expect from you as service – maintenance organization. This equipment is made for heavy use! Same as you find in the better equipped Vehicle Stations.


Brochure Downloads

VLT Road Combinations Roller Brake + Road Contact Tester

Sku: VLT-014

VLT Road Contact – Suspension / Roller Brake Testers as Stand-alone version. The most advanced solution to offer your Vehicle owners the service they expect from you as service – maintenance organization. This equipment is made for heavy use! Same as you find in the better equipped Vehicle Stations.

Standard available with nice and clear 22″TFT Monitor in Console on Pedestal and wand console for Controller and motor relays. Or as top model with stylish Console with printer compartment and keyboard shelf. Really an eye catcher in you workshop.

With the purchase of this combination you get the best equipment available in the market. The Road contact Tester operate according the well-known EUSAMA principe. No reference value needed, just give you the correct Safe / Unsafe conditions of the Vehicle. In addition to the usual road contact values, the following values are also measured and displayed: the contact value difference, resonance frequency and wheel weight at minimum contact value, tyre pressure value, wheel weight and axle weight. There is a general final evaluation so that all these values do not have to be interpreted after every test. This is indicated by means of green, orange and red icons.

The Suspension Tester is used in combination with the Brake Tester. The two pieces of equipment are fitted in one single frame, monitored by the same computer. In our standard configuration we make use of a 22″TFT Monitor. The axle weight measured by the Suspension Tester is also used for the calculation of the brake efficiencies.

The VLT 3673/MK2 is a more advanced development of the VLT 3673/M, still fully based on the EUSAMA principle. The VLT 3673/MK2 has the newly developed phase shift measurement, making the EUSAMA measurement somewhat more flexible for the lower wheel weights of small vehicles. The frequency of the VLT 3673/MK2 is controlled by a frequency inverter.

Technical Specifications

VLT ROAD CONTACT SUSPENSION / ROLLER BRAKE TESTER COMBINATIONS
VLT 362422/M/E/22″TFT, VLT 364222/M/P/22″TFT , VLT 365222/M/P/22″TFT
Model VLT 362422/M/E/22″TFT VLT 364222/M/P/22″TFT VLT 365222/M/P/22″TFT
Technical specifications Roller Brake Testers
VLT 2422/M/E/22″TFT VLT 4222/M/P/22″TFT VLT 5222/M/P/22″TFT
Measuring range low 0 – 6200 N 0 – 5000 N 0 – 6250 N
Measuring range high 0 – 10000 N 0 – 12500 N
Maximum axle weight with 50% braking 2500 kg 4000 kg 5000 kg
Maximum axle weight with 70% braking 1750 kg 2800 kg 3600 kg
Maximum drive-over weight 4000 kg 5000 kg 6000 kg
Testing speed 5.0 km/h 5.1 km/h 4.2 km/h
Dimensions of rollers 200 x 700 mm 220 x 860 mm 220 x 860 mm
Centre-to-centre rollers 375 mm 420 mm 420 mm
Rear roller raised by 30 mm rollers at same level rollers at same level
Minimum / maximum test width 800 x 2200 mm 730 x 2450 mm 730 x 2450 mm
Motor power (2x) 3.8 kW 5.5 kW 5.5 kW
Electrical supply. 400 V, 3 phase, 50 Hz 20 Amps delay 20 Amps delay 20 Amps delay
Monitor display 22″ LCD-TFT monitor 22″ LCD-TFT monitor 22″ LCD-TFT monitor
Drive-over cover plates optional optional optional
Infrared remote control standard standard standard
Radio frequency remote control optional optional optional
Printer and RS 232 interface standard standard standard
Pedal force transmitter optional optional optional
Optional subframe VLT 362605/T2 VLT 364005T2/730×2450 VLT 364005T2/730×2450
Technical specifications Road Contact Testers
Model VLT 3673/M VLT 3673/MK2
Measuring principle EUSAMA EUSAMA + phase shift
Motor power (2x) 3 kW 3 kW
Measuring frequency 25 – 0 Hz 25 – 0 Hz
Frequency regulated by frequency inverter no yes
Can test very low weight cars and cars with run-flat tyres yes yes
Vertical plate movement 6.0 mm 6.0 mm
Dimensions of measurement plate (2x) 400 x 700 mm 400 x 700 mm
Weight measuring system

25 – 1500 kg each wheel / 50 – 3000 kg per axle

Maximum drive-over weight 5000 kg 5000 kg
Technical specifications Side Slip tester VLT 3932/20
Model VLT 3932/M
Linear up to wheel load of (axle) 3500 kg (7000 kg)
Maximum drive-over weight (axle) 5000 kg (10000 kg)
Dimensions of drive-over plate 650 x 700 mm
Dimensions of compensation plate 195 x 700 mm
Measuring range toe in / toe out -20 / 0 / +20 mm/m
Contact sensor drive-in / drive out no
Rigid counter plate opposite VLT 39331
Optional subframe VLT 3918
Back to Top