All new VLT motorcycle Roller Brake Testers, especially designed for high throughput inspection stations, are also available as stand-alone for the after-market. These can be used in workshops, motor clubs or police stations and (as originally designed) for inspection stations. This Roller Brake Tester is available as stand-alone unit with a TFT-LCD monitor in 22″ size, and of course as part of a fully automated motor cycle inspection lane.
VLT Roller Brake Testers – Motorcycles : 0572 – 0573
All new VLT motorcycle Roller Brake Testers, especially designed for high throughput inspection stations, are also available as stand-alone for the after-market. These can be used in workshops, motor clubs or police stations and (as originally designed) for inspection stations. This Roller Brake Tester is available as stand-alone unit with a TFT-LCD monitor in 22″ size, and of course as part of a fully automated motor cycle inspection lane.
Brochure Downloads
Technical Specifications
| VLT MOTOR CYCLE ROLLER BRAKE TESTERS VLT 0572/M/22″/TFT and VLT 0573/M/22″/TFT |
||
| Model | VLT 0572/M/22″/TFT | VLT 0573/M/22/TFT” |
| Measuring range | 0 – 4000 N | 0 – 4000 N |
| Maximum wheel weight | 750 kg | 750 kg |
| Maximum drive-over weight | 1000 kg | 1000 kg |
| Testing speed | 5.2 km/h | 5.2 km/h |
| Dimensions of rollers | 260 x 350 mm | 260 x 350 mm |
| Centre-to-centre rollers | 350 mm | 350 mm |
| Rollers raised by | 40 mm* | 40 mm* |
| Motor power (2x) | 2.7 kW | 2.7 kW |
| Electrical supply at 400 V, 3 ph, 50 Hz | 16 amps | 16 amps |
| Facility for upgrading to | VLT 0573/M/22″/TFT | – |
| Weight measuring system range | no | 20 – 1000 kg |
| Drive-over cover plates | optional | optional |
| Printer and RS 232 interface | standard | standard |
| Optional subframe for concrete floor | VLT 0507/T2 | VLT 0507/T2 |
| Model number for testlane version | VLT 0572/M/TL | VLT 0573/M/TL |
| * = above floor level | ||
| VLT 0533/EURO | Motorcycle Wheel Clamping Device with alignment for checking the frame of the motorcycle | |
| VLT 0554/EURO | Motorcycle Wheel Clamping Device, rigid | |
| VLT 0556/T2 | Special subframe to install in the concrete floor, for VLT 0553/EURO – VLT 0572/0573 and VLT 0554/EURO, or two times VLT 0554/EURO with VLT 0572/0573 | |
| VLT 0951 | Hydraulic pump unit with controls for operating two clamping devices | |
| Note: when ordering the clamping devices and subframe, there is no need to order subframe VLT 0507/T2. | ||
Related products
PROALIGN ALIGNMENT SYSTEM
ProAlign alignment systems, using HawkEye® digital imaging technology, offer shops alignment service optimized for speed and efficiency with simple operation and low cost of ownership.
Brochure
COLLISION REPAIR ALIGNMENT
Keep more profits in house and control turn around time with alignments for collision repair!
Brochure Downloads
COLLISION REPAIR ALIGNMENT
VLT Above And / Or Under Carriage Special Keyboards
VLT introduced its famous time saving Above and/or Under Carriage Keyboards. A very robust, designed VLT product (suitable for a rough environment), which guides the
ECK LAND
The ECK Land is designed for mobile use and can be easily transported.
Brochure Downloads
ECK LAND
VLT Axle Load Simulators
VLT AXLE load simulators (classic way)A range of three different Axle Load Simulators is available from 4000 kg - 6000 kg and 10000 kg pulling
VLT Air Pressure / Pedal Force Transducers
VLT offers two types for data transfer:
A) the transducers with transmission of the data by cable to the VLT Roller Brake Tester controller, and
B) the
